LENCO Sportcam-700 Mode D'emploi page 12

Guide of operating
1. Plug the Micro SD card
Attention: We advise to use Micro SD cards with at least class
10 speed from a well-known brand for a better reliability.
2. Install the battery
a. Open the battery cover.
b. According to the plus-minus pole and the arrow on the
battery, place the battery into the camera accordingly.
3. charge the battery
a. Use the provided USB cable to connect to the computer or
the power adapter (not included) to charge the battery.
b. It is possible to charge the battery and recording video at the
same time.
c. Charging the battery is also possible when the product is
powered off.
4. Power on and off the camera
Press the power button for about 3-5 seconds to power on/off
5. Open/close the WIFI
a. Open the WIFI: shortly press the up key on the side: the LED
light turns to flashing yellow light.
b. Close the WIFI: shortly press the up key on the side: the
yellow light is OFF.
6. Change the mode
After power on, shortly press the Power ON/Mode button on
the front to change the function modes between record video/
photography/slow motion/playback file and settings.