Installing The Hood; Preparation Before Installation - Oceanic OCEAHC202SS Guide D'utilisation

Installing the hood

38

Preparation before installation

Carefully remove the carton. Wear gloves to protect your
hands from sharp edges.
Remove the protective film from the product before putting it
into service.
Installation (Mode extraction)
If the wall has an opening to the outside, your
hood may be connected as shown in the diagram
below
using the extraction duct
provided or any suitable
extraction conduit, for example a
flexible aluminum sheath or
constituted another non-
flammable material with an
insidediameter of less than
150mm.