Actively Connecting With Your Twion Wheels; If Servicing Is Required; Applications - Alber Twio mobility plus Mode D'emploi

2. CONNECTING TO THE TWION WHEELS
2.2

Actively connecting with your twion wheels

Activating twion wheels via the On/Off button on the wheel. Enter the
password under Connection Manager
Connection to the twion wheels can be terminated under Active
Connection Disconnect.

If your wheelchair moves in the opposite direction to that desired under
the BlueDrive control system (see chapter 3, BlueDrive control system),
the direction can be changed under Connection Manager
Wheel Pair Swap Wheels.

2.3

If servicing is required

If a wheel requires servicing, proceed as follows:
1. Delete the wheel pair under Manage Wheel Pair
2. Repeat initial installation as described in section 2.1. The license
code can still be used.
Active Connection Connect.
 
Manage

Delete Wheel Pair

20

3. APPLICATIONS

Driving Information
Find out driving parameters such as battery status,
average speed.
Easy changing between ECO and SPORT driving modes
TOUR mode
Recording and display of distances via smartphone GPS
signal
Detailed display and storing of TOUR data
SILENT mode
Mute mode switches off the LED display and the
acoustic signals from the wheel at the touch of a button.
An individual profile can be configured.
21