Connecting To The Twion Wheels; Initial Installation And Registration - Alber Twio mobility plus Mode D'emploi

2. CONNECTING TO THE TWION WHEELS

2.1

Initial installation and registration

1. Scratch to reveal the license code.
2. In the Connection Manager menu (
search for devices under Create new wheelpair and select two
Bluetooth modules.
3. Agree online licensing.
4. Enter license code.
5. Check submitted wheel codes.
6. Select the corresponding twion wheel based on acoustic signal.
7. Enter your name and personal password. The password may
have a maximum of 4 figure.
If you cannot connect with the Alber server, follow the registration
at www.twion.de.
If registration was successful, the following symbol appears in the
upper menu bar: and the current battery capacities are
connected
Symbols under chapter 3),

18
displayed under Driving Information. If this is not the case, go back
to step 2 and repeat the process.
Your password must be entered in different situations. For this reason,
you should use a password you can remember easily and keep it in a
safe place.
19