Finishing Setup
Running the ADAPTiQ
The ADAPTiQ audio calibration customizes the sound of the system to the
acoustics of your listening area by taking five audio measurements. To perform
an audio calibration, you need 10 minutes when the room is quiet.
1.
Put the ADAPTiQ headset on your head.
During the ADAPTiQ audio calibration, a microphone on the top of the
headset measures the sound characteristics of your room to determine
optimal sound quality.
2.
Insert the ADAPTiQ headset cable into the
3.
Press
4.
Press
until 14 ADAPTiQ appears on the display.
5.
Press
.
6.
Follow the voice prompts until the system completes the process.
7.
Unplug the ADAPTiQ headset from the console and store it in a safe place.
Note: If you move the system or any furniture, run ADAPTiQ again to ensure
optimal sound quality.
20 - English
on the remote control.
audio calibration
®
connector on the console.