Cleaning And Maintenance - Fiap LIGHT ACTIVE SET Notice D'emploi

LIGHTING TECHNOLOGY
LIGHT ACTIVE SET
Observe the relevant product videos on the subject of
installation and commissioning
in our Youtube channel:
https://www.youtube.com/user/FIAPGmbH

CLEANING AND MAINTENANCE

Before each cleaning and maintenance, make sure that the device is switched off and di-
sconnected from the power source. Observe the safety instructions! Use only water and a
soft brush. Make sure that no moisture gets into the device. If the lamp cover is dirty and
affects the light output, clean the cover.
REPAIR
The power supply unit and the LED lighting cannot be repaired if the cables or the hou-
sing are damaged and must therefore be replaced. If you have any questions or problems,
please contact a qualified electrician or your specialist dealer for your own safety.
STORAGE
The device must be taken out of operation and dismantled if frost is expected. First clean
the device as described under Cleaning and Maintenance. The device should be stored dry.
DISPOSAL
The device must be disposed of in accordance with national legal regulations. This device
must not be disposed of as domestic waste. Make the device unusable by cutting the ca-
ble and dispose of it via the return system provided. If the device contains light sources,
these must be disposed of using the return system provided for this purpose.
Ask your specialist dealer.
8
GB