Technical Data; Declaration Of Conformity; Safety Instructions - UFLOOR WOLFF ECO-STRIPPER 230 V Mode D'emploi

Comes with:
ECO-STRIPPER
blade 210 x 60 x 1 mm
tool kit
ear protectors
safety gloves
operation manual
Always wear ear protectors!
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
SMASTER
01/2005 FugenfräseFRÄ

1.0 Technical Data

Power supply . . . . . . . . . . . . . . . . . . . . . . . . .230 V AC (110 V)
Power consumption . . . . . . . . .2200 W, 10 A (2000 W, 19,2 A)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .with current limitor
Number of strokes . . . . . . . . . . . . . . . . . . . . .6300 strokes/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .88 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . .101 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 m/s2
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 kg
2.0

Declaration of conformity

We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50144, according to the provisions of the
Directives 2006/42/EC.
Vaihingen/Enz, 01.03.2010
Dipl.-Ing. (FH) Dieter Hammel
i.V.
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried
out. Use only the recommended blades and ensure it is sharp
before starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine WOLFF spare parts.
See supplementary sheet "General safety instructions"
Transport
To avoid harm or danger, always remove the blade before trans-
porting the machine. Using this machine without ear protectors
may jeopardize or harm your health. It may harm especially your
ears and increase the risk of an accident.
3.1 Introduction
This operating manual should be used to get the most benefit
from your ECO-STRIPPER. Following these instructions will
both extend the life of your machine and reduce repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The ECO-STRIPPER is designed to the highest technical stan-
dards. Incorrect use can be dangerous! Disturbances that could
impair safety, have to be eliminated at once.
Konstruktionsleitung
10