Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
• JVC SIRIUS Satellite radio interface, KS-SRA100, for listening to SIRIUS Satellite radio.
• JVC Smart Digital Adaptor, XMDJVC100, for listening to XM Satellite radio.
For SIRIUS Radio
Activate your subscription after connection:
1
Turn on the power.
2
Select "Satellite Radio."
The SIRIUS Satellite radio starts updating all the
SIRIUS channels. (☞ "GCI update" column below.)
• Once completed, SIRIUS Satellite radio tunes in
to the preset channel, CH184.
3
Check your SIRIUS ID, ☞ page 56.
4
Contact SIRIUS on the internet at <http://
activate.siriusradio.com/> to activate your
subscription, or you can call SIRIUS toll-free at
1-888-539-SIRIUS (7474).
"Subscription updated Press any Key to continue"
appears on the monitor once subscription has been
completed.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS: "Channel is updating XX% completed" appears.
For XM: "UPDATING" appears.
• Update takes a few minutes to complete.
• Do not touch any touch pad control, press any button, or perform any operation until updating is completed.
For XM Radio
Activate your subscription after connection:
• Only Channel 0, 1, and 247 are available before
activation.
1
Turn on the power.
2
Select "Satellite Radio."
The XMDirect™ Universal Tuner Box starts updating
all the XM channels. "Channel 1" is tuned in
automatically. (☞ "GCI update" column below.)
3
Check your XM Satellite radio ID labelled on the
casing of the XMDirect™ Universal Tuner Box, or
tune in to "Channel 0" (☞ page 44).
4
Contact XM Satellite radio on the internet at
<http://xmradio.com/activation/> to activate
your subscription, or you can call 1-800-XM-
RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
43
EXTERNAL DEVICES