Changing Hd Radio Reception Mode; Tuning In To Stations With Sufficient Signal Strength - JVC KD-ADV49 Manuel D'instructions

Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
2
3
Mode
Mono
DX/Local
SSM
Blend Hold
Auto
Blend Hold
Analog
Digital
Auto
Exit
Analog: Tuning to analog audio only
Digital: Tuning to digital audio only
Auto: Switch between digital and analog
audio automatically
• If no sound can be heard from the selected setting,
change the setting to <ANALOG> or <DIGITAL>.
• The setting automatically changes to <AUTO> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
AV Menu
Enter
Mode
Tuning in to stations with
sufficient signal strength
This function works only for FM bands.
Once you have activated this function (selected
<Local>), it always works when searching for FM
stations.
1
2
3
Mode
DX
DX/Local
Exit
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
• During SSM search (☞ page 12), this function
cancels temporarily.
47
AV Menu
Enter
Mode
Mono
DX/Local
SSM
Blend Hold
DX
Local
EXTERNAL DEVICES