LENCO HPW-400 Mode D'emploi page 18

7.
you may now switch the Bluetooth function of your phone back on
again (check whether any profile must be adjusted for telephone
audio)
6.2
Operation:
Receiving an incoming call while listening to the radio or TV:
1.
the sound of the radio or TV is interrupted and you'll hear a tone in
the ear speakers
2.
press the button
3.
you now have your conversation via the microphone and the speakers
of the headset
4.
at the end of the conversation the sound of the radio or TV is
enabled again
To listen to music on your phone:
1.
remove the adaptor of the base from the wall socket to ensure that
the connection between the headset and the base is interrupted
2.
make sure that the Bluetooth music option is enabled on your
phone
3.
press the
on your phone
If now you'd like to return to the base of the HPW-400, switch off the
Bluetooth function of the phone, insert the adaptor of the base back
into the wall socket, briefly place the headset onto the base and pick it
up again (don't forget to briefly slide the ON/OFF switch to OFF and
then to ON to switch the headset on again).
After reconnecting the headset with the base, you may switch the
Bluetooth function of the phone back on again.
to answer the telephone call
button on the headset to start playing the music
18