PRO-PULSE PBN5018 Manuel D'utilisation page 19

IMPORTANT SAFETY INSTRUCTIONS
34. CLEAN AND CHECK ALL AIR SUPPLY HOSES AND FITTINGS before
connecting the tool to an air supply. Replace any damaged or worn hoses
or fittings. Tool performance or durability may be reduced.
35. USERS MUST FOLLOW ALL SAFETY WARNINGS AND OTHER
INSTRUCTIONS in this manual. Keep it available for use by everyone
assigned to use this tool. Do not operate or allow anyone else to operate
the tool if any warnings or warning labels are not legible. Warnings or
warning labels are located on the tool magazine or body.
WARNING! The warnings, cautions, and instructions detailed in this manual
cannot cover all possible conditions and situations that occur. It must be
!
understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS that cannot be built into this product, but MUST BE SUPPLIED BY
THE OPERATOR.
SPECIFICATIONS
„ Shoots industry-standard 18 gauge brad nails in the following sizes: 3/8" (10
mm), 5/8" (15 mm), 3/4" (20 mm), 1" (25 mm), 1-3/16" (30 mm), 1-1/4" (32
mm), 1-3/8" (35 mm), 1-5/8" (40 mm), 1-3/4" (45 mm) et 2" (50 mm)
„ Operating pressure: 60 to 100 PSI
„ Maximum pressure: 110 PSI
„ Magazine capacity: 100 brads
„ Air fitting: 1/4" NPT
„ Tool weight: 2.9 lb. (1.3 kg) without fasteners
FEATURES
„ Rapid-fire trigger valve
„ Safety mechanism
„ Comfortable padded rubber hand grip
„ Slim nose reaches into narrow places
„ Side-loading magazine with windows to show remaining fasteners
This tool can be used for cabinet making and furniture assembly, door and window
casing manufacturing, aluminium and vinyl siding installation, soffit work, trim and
moulding application, picture framing and applications where gluing is necessary,
but clamping is impractical.
INCLUDES
„ Small bottle of air tool oil
„ 2 hex keys
„ Air fitting
„ Blow-molded carrying case
19