Publicité
Requirements | Assembly instructions | Care information
•
Observe the local building regulations and the snow load zones in your region.
•
Before the assembly sort the parts and check the contents list according to the assembly instructions.
•
At least 2 persons are required to assemble the carport kit.
•
Follow the instructions and installation steps in the assembly instructions.
•
The Twin-Wall Sheets do not walk on transverse running boards (at least 2 rafters).
•
Point loads must be avoided absolutely
•
Regularly remove snow from the roof
•
Snow load 150 kg/m²It makes sense to install a snow guard above the carport.
•
Keep the gutter free of leaves, dirt and snow.
•
The carport kit must be installed on a flat, solid surface (for example concrete, concrete slabs).
Foundation dimensions: length 40cm x width 40cm x depth 80cm
•
Clean the Twin-Wall Sheets with water and a mild detergent and do not use abrasives, acetone or solvents!
•
Defective or bent posts or beams must be replaced immediately.
Colour and size deviations etc. within the usual tolerances reserved. Our recommendations do not release the custo-
mer from the obligation to check the product on his own responsibility. In case of doubt, please consult a specialist.
Technical modifications reserved
4 und 5
13, 17, 19
17
TX 25
3
Publicité
