Use Your Stethoscope; Auto Switch On/Off; Adjust The Volume; Adjust The Left/Right Balance - Philips 8000 Série Mode D'emploi

4 Use your
stethoscope

Auto switch on/off

• The stethoscope is on automatically when
you wear it on your ears.
» The LED on the stethoscope will turn
white.
• The stethoscope is off automatically when
you take it off from your ears. This saves the
battery life.

Adjust the volume

If you turn the volume control button of the
stethoscope to the maximum level and the
sound volume is still low, you can adjust the
volume of your TV to improve the quality of
wireless sound transmission (check the manual
of your audio device for information).

Adjust the left/right balance

You can adjust the left/right balance to make
your both ears hear well (see 'Overview of the
stethoscope' on page 4).
Amplify the environmental
sound
You can press the microphone button to
turn off the sound of the TV and amplify the
environmental sound and conversations (see
'Overview of the stethoscope' on page 4).

Equalizer (EQ)

You can press the EQ button to select among
voice emphasis EQ 1, treble boost EQ 2, bass
boost EQ 3 or off to suit your personal sound
preference and give you the best sound quality
(see 'Overview of the stethoscope' on page 4).
Store and charge the
stethoscope
Place the stethoscope to the docking station
after use. This can prevent the earbuds from
pulling apart, which will keep the stethoscope
switching on.
EN
7