B-Twig 8Cs Mobile Kit; System Assembly And Disassembly Instructions - ADVANCED NATIVE TECHNOLOGIES B-TWIG 8 MOBILE Notice D'emploi

3.4 | B-TWIG 8CS MOBILE KIT

The kit, supplied with the appropriate carrying case, consists of two column elements: a stand
(element A) and a speaker (element B). Both are equipped with slide connection mechanism,
allowing quick coupling and release of the elements composing the system, ensuring perfect
functionality in complete safety.
A B

4 | SYSTEM ASSEMBLY AND DISASSEMBLY INSTRUCTIONS

To install the appliances and to ensure their correct operation, strictly follow the following
instructions:
• Place the subwoofer upright on a flat and stable surface, making sure that all lower rubber
feets are perfectly adherent to the floor or surface.
• Never install the system on movable carts, chairs, tables, or similar objects that are not
stable or able of bearing system weight.
• Do not use the handle to suspend the system.
• Never obstruct the ventilation slots located on subwoofer rear frame.
• To allow proper dissipation of the amplification heat, leave a sufficient distance between
the rear panel of the subwoofer and other objects such as walls, corners, curtains, and
never place the unit near heat sources of any kind.
B-TWIG 8 MOBILE
12 User manual |
Top view
Plug Side Socket Side
Audio Contacts
INSTALLATION:
1. Place the subwoofer on a flat surface with no unevenness (Fig.1)
2. Secure element A by sliding it into the slide coupling mechanism (Fig.2).
3. Repeat the operation to fix element B in the upper part of the system (Fig.3)
Fig.1 Fig.2
A
Fig.3
B
B
Click
A
A
Hook B by pushing
towards arrow direction
A
Click
Hook A by pushing
towards arrow direction
Side Rear
View View
Final assembly
B-TWIG 8 MOBILE
13
| User manual