Input Edit Menu - Ecler ALMA26 Notice D'utilisation

7. INPUT EDIT MENU

To open the edit menu for the settings of an input, you have to press SHIFT + MUTEx, MUTEx
being the input 1 or 2 MUTE key.
Once in the edit menu for an input, and in one of its pages, it is possible to obtain the same page
for the other input by pressing SHIFT + MUTEx, MUTEx being the input 2 MUTE key if you were editing
the input 1, or 1 if you were editing the input 2.
The new edited values are activated in real time. You can cancel an edit operation, bringing back
the value before editing, by pressing SHIFT + CANCEL.
To exit the Edit menu and return to the main screen:

Press SHIFT + EXIT

Press SHIFT + MUTEx (the MUTE key of the input x currently edited)

Stay 2 minutes without operating any control on the front panel
The next page shows the full structure and options of the menu for setting inputs.
NOTES:
1. In the setting pages of the 4 parametric filters available for each input, the displayed
abbreviations meaning is:

BYP: BYPASS (filter not activated)

PEQ: PARAMETRIC EQ

HS6 / HS12: HIGH SHELF 6 or 12 dB/octave

LS6 / LS12: LOW SHELF 6 or 12 dB/octave

HP6 / HP12: HIGH PASS 6 or 12 dB/octave

LP6 / LP12: LOW PASS 6 or 12 dB/octave

AP1 / AP2: ALL PASS 1st or 2nd order
2. The COPY FROM – PASTE TO operation copies all the settings from the source input to the
destination input, except for its name (LABEL)
12