Changing The Charging Characteristics - easydriver c-Go Instructions D'assemblage Et Mode D'emploi

5. Changing the charging characteristics

By default the c-Go has been set to charge GEL or
AGM type batteries with a maximum charging vol-
tage of 14.4V. This charging voltage may be increa-
Caution! This charging voltage may
only be used for the designated
batteries, e. g. Optima YT S 4,2. Always
observe the specifications of the
battery manufacturer
sed to 14.7V. For this purpose make the necessary
jumper adjustment on the rear of the unit.
15