Dexter 20VMT2-20.1 Mode D'emploi page 306

FR FR
2. SAFETY INSTRUCTIONS
ES ES
A. Hold the power tool by insulated gripping surfaces, when
PT PT
performing an operation where the cutting accessory or fastener
may contact hidden wiring. Cutting accessory and fastener contacting
IT IT
a "live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
EL EL
B. Double check that the accessories and tool attachments are
properly fixed. One minute testing running in no-load condition will be
PL PL
helpful to identify any problems.
C. Use auxiliary handle(s), if supplied with the tool. Loss of control can
RU RU
cause personal injury.
D. Keep the handles dry to ensure safe control. Grip the product
UA KZ
securely with two hands so you have full control at all times.
E. Use appropriate detectors to determine if utility lines are hidden
KZ UA
in the work area or call the local utility company for assistance.
Contact with electric lines can lead to fire and electric shock. Damaging
RO
RO
a gas line can lead to explosion. Penetrating a water line causes property
damage or may cause an electric shock.
BR
BR
F. Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the workpiece by hand or
EN
EN
against your body leaves it unstable and may lead to loss of control.
G. Only use the power tool for dry sanding. Water entering a power tool
will increase the risk of electric shock.
H.Take special care to protect yourself and people around against
dusts, including the following:
. All persons entering the work area must wear an appropriate dust
mask specially designed for protection against harmful / toxic dusts, in
addition to using the dust extraction facility and keeping work area well
ventilated.
. Children and pregnant women must not enter the work area.
. Do not eat, drink or smoke in the work area.
I. Warning: Danger of fire! Avoid overheating the workpiece and
the sander. Always empty the dust collector before taking a
break from work. Sanding dust in the dust bag, microfilter, paper bag
(or in the filter bag or vacuum cleaner filter) can spontaneously combust
under certain conditions, for example if flying sparks are created when
306