Controle Panel - OXBOARD E-SCOOTER PRO2 Mode D'emploi

8 INSTRUCTIONS
2. HOW DOES YOUR E-SCOOTER PRO 2 WORK?
2.3 Control panel
Use the controle panel to controle the scooter. The specific
features are as follows.
1. Long press the power button to turn on the the scooter
and front ligth, lower atmosphere light, tall ligth and
brake light will all go on. The controle panel also shows
the power and the speed.
2. After turning on the, the control panel display shows
"1", indicating that the speed is in 1st gear. Press the
button to display 2nd gear; the highest display is 3rd
gear.
3. Press the button twice and the front light goes on,
press again twice and the front light will go off.
4. Press the button the times to display the total mileage,
then press the button three times to display the speed.
5. When the brakes are applied in emergeny, the bright-
ness of the brake increases after the brake handles are
gripped.
6. Power display: five lights means fully loaded, four lights
means 50%, three lights means 30%, two lights means
10% and one ligt means less than 10%.