Publicité
Les langues disponibles
Les langues disponibles
pins enter the board connectors applying pressure slowly to ends of
tube, preferably the outer leads. Snap the printed circuit board
assembly back into housing, reinstall referring to the appropriate
previous installation instructions as necessary.
D. Service.
The Federal factory will service your equipment or provide technical
assistance with any problems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or
repair must be accompanied by a Return Material Authorization.
This R.M.A. can be obtained from a local Distributor or
Manufacturer's Representative.
At this time a brief explanation of the service requested, or the
nature of the malfunction, should be provided.
Address all communications and shipments to:
E. Replacement Parts.
Description
Strobe tube
Gasket
Mounting hardware kit
Service Department
Signal Division
Federal Signal Corporation
2645 Federal Signal Drive
University Park, IL 60466-3195
Part Number
K149128A
K8435713A
K8435715A
3
Publicité
