Maintenance + Care; Service & Support - AQUAJOE AJ-ET2Z Instructions D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Maintenance +
Care
Follow the steps below if the timer stops
working or exhibits poor water quality due to
debris or dirt build-up.
1. Remove the inlet filter from the faucet
connection and rinse under water to
remove any dirt or debris (Fig. 5).
Fig. 5
Inlet filter
2. With timer compartment cover closed
securely, flush faucet connection with
a stream of water, and repeat for both
hose connections (Fig. 6).
Fig. 6
3. Replace inlet filter before reattaching to
water source. Tighten faucet connection
securely.
m
WARNING!
Detach from faucet during freezing weather.
This product is intended for outdoor watering
use only. Do not use water exceeding 100 ̊ F
(38 ̊ C ) or with pressures exceeding 100 psi.
Service + Support
If your AQUA JOE
Electronic Water Timer requires service or
maintenance, please call the Snow Joe
+ Sun Joe
customer service center at
®
1-866-SNOWJOE (1-866-766-9563).
Record the following numbers from the housing or handle of your
new product:
A J - E T 2 Z
4
AJ-ET2Z 2-Zone
®
Model #:
Serial #:
®

Publicité

Table des Matières
loading

Table des Matières