Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. SELF-SERVICE (OPTIONAL)
On the self-service mode only exist three temperatures. The time is set by the number of impulses
that the control receives. That impulse can arrive from a coin / Token control or an external payment
system.
The cooldown step is not separated from the total time and in stops the heating few minutes before
the end.
There are three situations:
2. Waiting impulse. It appears the following steps.
2.- Once the first impulse arrives, it appears the following window where the temperature,
Low, Mid or High can be set. To start just push the START/STOP button.
With the arrows you change the temperature at any time.
After 10 minutes without the Start the credit is lost.
In any case you will lose the money.
3.- Once the START button has been pushed the dryer starts showing the residual time and
the selected temperature.
When the time finishes, the buzzer sounds and appears END on the display. The anti-wrinkles step
is not performed.
DTA-DTP-11-18-27_Manual_ML
INSERT COIN
START
Página 55 de 109
Publicité
Table des Matières
