Status Page; The Menu Bar; File Ö New Customer; File Ö Save Configuration - Bentel Profiline AZ6400 Instructions D'installation

Click the button (loading takes several
seconds).
S P
TATUS AGE
This page (see Figure 13) will allow you to monitor the
signal strength of the 6 Neighbour Cells. It also provi-
des information on the GSM Module and SIM-CARD.
Click the button to view the signal strength of
the GSM Cell you are using, and the Neighbour
Cells. This feature will allow you to see if, and
how many, Neighbour Cells your GSM Network
will provide in the event of GSM trouble (Line down).
If your GSM Network does not provide at least 2
Neighbour Cells, change to another Network.
Click the button to exit the scanning phase. If
you do not exit this phase, it will be impossible to
continue and a warning will be shown (see Figure
14).
34
T M B
HE ENU AR
This section describes the Menu Bar Options.

¶
This option will allow you to program New Cu-
stomer configurations, delete current data and
reset default. If any unsaved data is present,
when this option is selected, the "
dialogue box (see Figure 15) will be shown,
click " " to save and continue.
Before allowing you to program a
, the application will show the
window (see Figure 18), refer to
¶ ¶ ¶ ¶ ¶
  
 
¶ ¶ ¶ ¶ ¶
This option will allow you to save new configura-
tions, or copy and re-use previously program-
med configurations (with new Customer details
and Codes). If you select this option for a New
Customer, the Application will open on an empty
Customer Data Window (see Figure 16). If you
select this option for a saved Customer, the Ap-
plication will open on the Customer Data window
containing the relevant details. Click
assign a Customer code automatically.

¶
This option exits the Application. It can be used
instead of the
window. If unsaved data is found on closure,
the " " dialogue box (see Figure 15)
will be shown, click "
for further information.
on the top right of the Main
" to save the data.
"
to