HumanTechnik Signolux MV-1 Mode D'emploi page 3

We would like to congratulate you on
purchasing the »signolux MV-1«. You
have chosen a modern and reliable
system. Kindly read the instruction
manual carefully in order to use the
device properly and to familiarise
yourself with all the possibilities of the
system.
Package contents
Kindly check if all following parts are
included:
- »signolux MV-1«
- vibrating pad
- 7.5 volts power supply unit
- AUX connection lead
- Instruction manual
- Warranty card
Should any parts be missing, kindly
contact your specialist dealer or the
manufacturer directly.
Functioning principle
The »signolux MV-1« reacts to the
AUX output signal of various signolux
receivers and actutates the included
vibrating pad by forwarding the alert
and powering the vibrating pad when
it is connected to the VIB output of the
MV-1.
For reasons of safety, the MV-1 con-
tains a rechargeable battery which is
charged when the MV-1 is connected
to a mains power outlet.
In the occurrence of a power black-
out, the MV-1 acts as a backup and
can actutate the vibrating pad for
1500 vibration periods of 30 seconds
each.
RM2689-0_signolux_MV-1_2019-11.indd 3
Setup
Connect the power supply unit to the
7.5 V power socket at the rear of the
MV-1 and plug it into a mains power
outlet.
Connect the AUX output of the signo-
lux receiver (for example the Vibrating
Pager) to the AUX socket of the MV-1
by means of the AUX connection lead.
Plug the jack of the vibrating pad into
the MV-1's VIB socket.
The MV-1 is now ready for use.
In case the internal battery is depleted,
please note that it needs about 5 hours
of charging time until it reaches full
capacity. The basic functionality of the
MV-1 is not affected by the recharging.
Compatible signolux receivers
The following signolux receivers and
other Humantechnik devices feature
an AUX output socket and can there-
fore be used with the MV-1 and the
battery-less vibrating pad:
- signolux Vibrating Pager
- signolux Standard receiver
- signolux alarm clock
- iBell2 Call detector for mobile
phones
Please note: The signolux »Receiver
S« is capable of powering the batte-
ry-less vibrating pad without needing
the MV-1.
English 3
30.11.2019 08:08:45