Usb Output; Operation With Remote Control; Address Settings - IVT DSW 12 V Série Notice D'utilisation

USB OUTPUT

The USB output may be used to supply various 5 V consumers with maximum 500 mA.
This output is not suitable for data transmission.

OPERATION WITH REMOTE CONTROL

All models of this inverter series may be operated with remote control units.
You may choose between various versions.
FB-01 (Part.-No.: 430111)
This model is a cable version which is directly connected to the voltage converter. It is equipped with an on/off switch and two
control indicators for DC input and AC output.
FB-04 (Part.-No.: 200051)
This model is USB-connected to the voltage converter and is equipped with a colored LC display. The display serves for both
monitoring important values and making adjustments for deep discharge protection. The remote control is also equipped with
a SD card slot. This allows storing important values and easily transferring them to your PC.
FB-05 (Part.-No.: 200053):
This model is a radio version. The transmission stick is connected to the voltage converter. The device offers the same
functions and adjustment features like the FB-04.
Webbox-LCD (Part.-No.: 200054)
With this additional device it is possible to get access to the inverter over an existing network. The Webbox offers identical
functionalities like the remote control units FB-04 and FB-05.

ADDRESS SETTINGS

Address settings enable control and data readout for up to 4 converters with one remote control. The inverter is assigned an
address from 1 to 4 by changing the position of DIP switch 3 and 4 (see picture). This setting is only required if the remote
control unit is used for more than one inverter.
Address 1:
DIGITAL SINUS INVERTER DSW-2000 SYNCHRON
DSW-2000 Synchron /12 V
DSW-2000 Synchron /24 V
Synchron connection cable 1 m
Please use only the synchronous cable supplied by the manufacturer.
For connection observe all hints given in the chapter „CONNECTION".
Turn on both devices after each other only if you have connected the Synchron connection cable and the
DC power supplies. Ensure that the DC connection cables are identical.
Address 2:
(Part.-No.: 430109)
(Part.-No.: 430110)
(Part.-No.: 431007)
Address 3:
Two DSW-2000 Synchron inverters are connected in
parallel via an additional connection socket and
synchronized to achieve a permanent output power
of 4000 W.
The two inverters can also be operated individually
with the respective continuous output of 2000 W. All
of the other features, technical data and operation
elements correspond to the normal DSW 2000 in the
12 V or 24 V version.
15
Address 4: