Product Overview; Areas Of Application En; Control Elements En - Abicor Binzel MF Control Mode D'emploi

MF Control

5 Product overview

The MF Control is an electronic instrument for monitoring the wire feeding unit.
5.1 Areas of application
The visualisation and monitoring of processes and equipment in the welding and brazing industry is
becoming increasingly important. The MF Control is a visualisation and analysis system for all process
parameters and data relevant to the MFS-V3 master feeder system. Data is requested and displayed
graphically via the Ethernet interface. The MF Control offers the following functions:
• Visualisation of actual values
• Visualisation of eBOX inputs and outputs
• Component and seam-specific archiving of the
• Visualisation of target values
• Threshold value monitoring and display
Tab. 7
For more precise details about the MFS service software, refer to the BAL.0420.0 operating manual.
5.2 Control elements
1
2
Fig. 2
Symbol Number
actual values for the process
Areas of application
1 2
E1 key Windows start menu 3
E2 key (not assigned) 4
Operating panel MF Control
(5)
Brightness control setting
(6)
ON button
• Nonconformity and event logs
• Data export to Microsoft Excel
• Diagnosis
• Display of maintenance intervals or messages
• Job functionality for up to 64 jobs
3 4 5
E3 key (not assigned)
E4 key, right mouse-click top open the
context menu
Explanation
• Sets the level of brightness on the display screen.
• Switch on the device.
5 Product overview
6
5 Brightness control setting
6 ON button
EN - 7