ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Dimensions (L x W x H)
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
FCC statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—
Consult the dealer or an experienced radio/TV
technician for help.
FCC CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Makita U.S.A. Inc.
14930 Northam Street, La Mirada, CA 90638-5753, USA
+1-(714) 522-8088
CAN ICES-3 (B)/NMB-3(B)
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read the instruction manual.
DOUBLE INSULATION
Do not expose to moisture.
154 mm x 71 mm x 57 mm
(6-1/16" x 2-3/4" x 2-1/4")
SAFETY WARNINGS
NOTE: The wireless unit adaptor is hereinafter
referred to as "adaptor" in this instruction manual.
WARNING:
Be sure to thoroughly read and
understand this instruction manual as well as the
instruction manuals of the vacuum cleaner, tool,
and wireless unit to be used with this product.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Important safety instructions for the
adaptor and wireless unit
1.
Do not disassemble or tamper with the wire-
less unit and the adaptor.
Keep the wireless unit and adaptor away from
2.
young children. If the wireless unit is accidentally
swallowed, seek medical attention immediately.
Use the wireless unit only with Makita tools.
3.
4.
Never handle the adaptor with wet hands.
Doing so may cause electric shock.
5.
Do not block the vents on the adaptor.
Do not use the adaptor's cord for carrying and
6.
unplugging.
7.
Do not expose the wireless unit and the adap-
tor to rain or wet conditions. Liquid come inside
the appliance may cause malfunction and/or
electric shock.
Do not use the wireless unit in places where
8.
the temperature exceeds 50°C (122°F).
9.
Do not operate the wireless unit in places
where medical instruments, such as heart
pace makers are near by.
10. Do not operate the wireless unit in places where
automated devices are near by. If operated, auto-
mated devices may develop malfunction or error.
11.
Do not operate the wireless unit in places under
high temperature or places where static electric-
ity or electrical noise could be generated.
12. The wireless unit can produce electromagnetic
fields (EMF) but they are not harmful to the user.
13. The wireless unit is an accurate instrument. Be
careful not to drop or strike the wireless unit.
14. Avoid touching the terminal of the wireless
unit with bare hands or metallic materials.
2 ENGLISH
WUT02
0.41 kg (0.90 lbs)