INSTALLATION REQUIREMENTS
LOCATION REQUIREMENTS
Keep ammable materials and vapors, such as gasoline, away from
appliance.
Failure to do so can result in death, explosion or re.
IMPORTANT: This freezer is designed for freestanding installation only. It should
not be recessed or built-in an enclosed cabinet. To ensure your freezer works
at optimum efficiency, you should install it in a location where there is proper air
circulation, and electrical connections.
Recommended Clearances:
•
Do not install your freezer in any location not properly insulated or heated such
as a garage. Your freezer was not designed to operate in temperature settings
below 55˚F (13°C).
•
Select a suitable location for the freezer on a hard even surface away from direct
sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances
etc. Any floor unevenness should be corrected.
•
Place the freezer on a floor strong enough to support it fully loaded.
6
WARNING
Explosion and Fire Hazard
4"
(10.2 cm)
4"
(10.2 cm)
Do Not
BlockTop
4"
(10.2 cm)