HAEGER Vapour Pro 2700 Mode D'emploi page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
 The iron must be used and rested on a stable surface.
 Do not use the iron if it has been dropped, shows visible signs of damage or if it is leaking water. I t will have to be checked by
an Authorized Technical Service Centre before it can be used again.
 During breaks in ironing, leave the appliance in the vertical position.
 Never leave the hot iron on textiles or materials which could burn easily.
 Never rest the iron on the electrical connection cable.
 Do not use the iron if the cable becomes frayed.
 Do not immerse the iron in water or any other liquid.
 Unplug the iron from the mains supply before filling it with water, or before pouring out the remaining water after use.
 When the ironing is finished unplug it from the mains and empty out the water tank.
 Do not unplug it by pulling on the cable, nor leave the plug hanging freely.
 If you have to leave the room where you are ironing, then switch the iron off and pull the plug out off the wall socket.
 With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains
cable, must only be carried out by qualified personnel from an Authorized Technical Service Centre.
Description
About your Steam iron:
1.
Spray nozzle
3.
Steam regulator
5.
Spray button
7.
Pilot lamp
9.
Soleplate
2
2.
Water tank cover
4.
Super Steam button
6.
Temperature regulator
8.
Water tank
10. Self Clean
Instructions for use

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Si-270.013a

Table des Matières