Ordering Replacement Parts; Troubleshooting Guide - Pattfield Ergo Tools E-LS 2445 Mode D'emploi D'origine

Anleitung_E_LS_2445_SPK7:_
GB
●
Dirt and grime can make the switch
(blower/vacuum) more difficult to operate as a
result of the material that swirls up off the
ground. When this occurs, simply flip the switch
back and forth a few times, which should bring it
back to the normal feel.
9.0 Repair
Should the tool experience problems beyond those
mentioned above, let only an authorized professional
or a customer service shop perform an inspection.
10.0 Disposal
The tool, accessories and packaging should be
disposed of in an environmentally-friendly fashion.
Plastic parts are coded for purposes of separation
when recycling.

12.0 Troubleshooting guide

Fault
Motor does not start
14
13.04.2011 11:28 Uhr Seite 14

11. Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Possible cause
No electricity at the plug
Power cord defective
Motor terminals disconnected
Suction tube not mounted
correctly
Remedy
Check the cord and fuses
Check the power cord
Have the unit checked by a
customer service workshop
Mount the tube correctly