Operating Precautions - RCF AM2080 Manuel De L'utilisateur

8.
Do not connect this product to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and do not try to hang this
product by using elements that are unsuitable or not specific for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling,
structure, etc.), and the components used for attachment (screw anchors, screws, brackets not
supplied by RCF etc.), which must guarantee the security of the system / installation over time,
also considering, for example, the mechanical vibrations normally generated by transducers.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this
possibility is specified in the user manual.
9.
RCF S.p.A. strongly recommends this product is only installed by professional qualified installers
(or specialised firms) who can ensure correct installation and certify it according to the regulations
in force.
The entire audio system must comply with the current standards and regulations regarding electrical
systems.
10.
Supports and trolleys
The equipment should be only used on trolleys or supports, where necessary, that are
recommended by the manufacturer. The equipment / support / trolley assembly must be moved
with extreme caution. Sudden stops, excessive pushing force and uneven floors may cause the
assembly to overturn.
11.
There are numerous mechanical and electrical factors to be considered when installing
a professional audio system (in addition to those which are strictly acoustic, such as sound
pressure, angles of coverage, frequency response, etc.).
12.
Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level
that leads to hearing loss is different from person to person and depends on the duration of
exposure. To prevent potentially dangerous exposure to high levels of acoustic pressure, anyone
who is exposed to these levels should use adequate protection devices.
When a transducer capable of producing high sound levels is being used, it is therefore
necessary to wear ear plugs or protective earphones.
See the technical specifications in loudspeaker instruction manuals to know their maximum
sound pressure levels.
IMPORTANT NOTES
To prevent the occurrence of noise on microphone / line signal cables, use screened cables only
and avoid putting them close to:
•
Equipment that produces high-intensity electromagnetic fields
(for example, high power transformers)
•
Mains cables
•
Loudspeaker lines.

OPERATING PRECAUTIONS

•
Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat
sources and always ensure adequate air circulation around the ventilation grilles.
•
Do not overload this product for a long time.
•
Never force the control elements (keys, knobs, etc. ).
•
Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external
parts of this product.
17