Maintenance; Reciclying And Disposing; Guarantee - Greencut CD-230P Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ATTENTION: Replacing the fuse with a different current rating than that indicated on the nameplate
may result in damage to persons or property. For the same reason, avoid replacing the fuse with
copper or other material bridges.
The fuse must always be replaced with the power cord disconnected from the mains. Be careful when replacing the
ribbon fuse, if present, tighten the fixing nuts firmly.

MAINTENANCE

Clean the positive and negative terminals of any rust deposits to ensure good contact of the clamps.
Avoid contacting the two clamps when the battery charger is connected to the mains. This will blow the fuse.
Store the charger in a cool, dry place.
It is not recommended to leave it in a vehicle in hot or cold conditions.
Make sure that no metal chips or shavings fall into the ventilation grilles during storage, as this can cause serious
injury when used again.

RECICLYING AND DISPOSING

When you decide to get rid of the machine, make sure to follow the local regulation.
Please help us to protect the environment and to preserve natural resources.
Get rid of the machine taking care of the environment. Do not simply throw it away in the domestic bin. Please
separate plastic and steel to recycle. Take this device to an authorised recycling centre. (Green point)
Package materials are recyclables. Please, throw them away on the appropriate rubbish bin.

GUARANTEE

GREENCUT guarantees a 2 years warrantee for all its products (valid in Europe). This guarantee is subject to the
purchasing date and taking into consideration the purpose of use of the product. In order to claim your guarantee,
you must present your receipt of purchase and its description, as well as the defective product.
The warranty does not cover normal wear and tear and damage caused by improper use, especially non-compliance
with the operating and maintenance instructions.
The guarantee is also excluded when non GREENCUT original or not-adequate assembly accessories or parts have
been used on the product.
In the event of a justified guarantee claim, we are authorised, as per our criteria, to repair or replace the faulty tool
free of charge. Claims beyond those described in this guarantee will be invalid.
Product failure as a result of failure to follow the maintenance program will void the warranty. Be sure to keep receipts
for all maintenance performed for verification if a warranty inquiry arises.
41
EN

Publicité

Table des Matières
loading

Table des Matières