Publicité
Les langues disponibles
Les langues disponibles
i.
IP address: 192.168.0.100
ii.
Subnet Mask: 255.255.255.0
iii.
Default Gateway: empty
3.
Open Lumensafe Fixture and locate "Data in" Port* on PoE injector inside fixture. (Figure 1.)
4.
Connect incoming Ethernet cable to "Data" in Port of PoE injector inside fixture.
5.
Pull up camera video stream by entering the camera's IP address below into a web browser.
a.
https://192.168.0.90/
Installation Instructions – LumenSafe Ethernet Set Up Instructions
COOPER LIGHTING SOLUTIONS
IB512006EN
Installation instructions
3
Publicité
