INSTRUCTIONS: How to Disassemble
1
2
3
4
5
6
SPECIAL NOTE: The stainless steel basket is a precision-engineered item that should be
handled carefully. This will help the juicer run efficiently and smoothly while increasing
its operating life.
6
Remove pusher from feed chute.
Release both side latch arms by inserting
fingers into the two side openings at the
bottom of the motor base housing and
by pulling outward.
Remove cover.
Lifting from the bowl. Simultaneously
lift out bowl, coupling, and strainer
basket/blade assembly. Do not attempt
to remove the strainer basket/blade
assembly by itself.
Separate
the
pulp
basket/blade assembly and coupling
from bowl.
Remove the Pulp Reception Bin.
chute,
strainer