Sammic HM-1035M Mode D'emploi page 16

If these functions are
different to your oven
functions
The functions described in
this manual show the
available functions in the
product range. If your
microwave does not include
all of the options shown, this
is not a mistake. The
information provided applies
to several models in this
product range.
6
ENGLISH
Screen and functions (HM-1035 P)
CHECK PROGRAM button
This function allows you to check the programmed cooking time and the power level
for any programmed button.
1. Press the CHECK PROGRAM button.
•The screen displays CHECK.
2. Press the required number button.
• The screen displays PROG–XX (XX shows the program number).
• The screen displays STAGE- 1, and then the cooking time and the power level
blink. Example: 00:30 HI (00:30 HIGH)
• The same information is displayed on the screen for the next stages.
3. Press the STOP/RESET button to exit the Check program function.
Energy saving mode
This function is used to save energy:
1. Press the CHECK PROGRAM button and hold it down for 3 seconds.
•The screen displays CHECK, the oven beeps and the screen goes blank.
2. To use the oven in Energy saving mode, press any button.
• The screen displays: 0 and all of the keypad functions will be the same as the
Normal mode functions.
• If the keypad is not touched for a period of 10 seconds, the screen will go blank.
3. To disable this mode, press any key and keep the CHECK PROGRAM button held
down for 3 seconds.
• The screen displays CHECK and the oven beeps.
4. Press the STOP/RESET button so that the oven goes back to normal mode.
Program lock mode
This function locks the control panel and prevents the oven from being operated
inadvertently.
1. Press the STOP/RESET button and keep it down for 3 seconds to enable it.
• The oven beeps and the screen displays: 0 next to a
2. Press the STOP/RESET button and keep it down for 3 seconds to disable it.
•The oven beeps and the
Silent mode
This function silences the keypad (except the end of cycle beep). Proceed as follows:
1. Press the QTY 2X buttons and keep it down for 3 seconds.
• The screen displays DOUBLE, the oven makes a noise and the screen displays
MUTE for 1 second. The then screen displays: 0.
2. To disable it, press the QTY 2X buttons and hold it down for 3 seconds.
• The screen displays DOUBLE, the oven makes a sound and the screen displays: 0.
DEFROST button
When DEFROST is selected, the automatic cycle divides the defrost time into alternate
defrost and rest periods by stopping and starting. The maximum defrost time is 60
minutes.
button display disappears.
button display.