Sammic HM-1035M Mode D'emploi page 20

The dial option is only available in some
10
ENGLISH
Operation with a dial (HM-1035 M)
models.
Free space around the oven
A — Leave at least 10.2 cm (4 inches) above and on the sides of the oven. A proper
flow of air around the oven will cool electrical parts down. A restricted air flow
could cause the oven to malfunction and the service life of the electrical parts to
be reduced.
B — Leave at least 10.2 cm (4 inches) between the air outlet at the rear of the oven
and the wall behind it.
DO NOT use a spray gun
To cook
1. Open the oven door, put the food inside and close the door.
2. Turn the power level dial to the required level.
• The power level can be set as Low (17%), Defrost (33%), Medium (55%), Med.
High (77%) or High power (100%).
3. Turn the time selection dial clockwise until the required value is displayed.
• The cooking time can be set up to 10 minutes.
• If you are going to turn the time dial to less than 2 minutes, turn it to past 2
minutes and then go back to the required value.
4. The oven starts operating and the countdown begins.
5. Once the cooking time has elapsed, the microwaves stop being emitted and the
oven beeps.
To stop the oven
Open the door to stop the oven or turn the time selection dial anticlockwise to "0". To
restart the oven, close the door.
If you changed the time to "0", you need to reset it.
To change the cooking time and cancel errors
The cooking time and power level can be changed at any time while the oven is
operating. Turn the dial(s) to the new required value. To set the cooking time to zero,
turn the time selection dial anticlockwise to "0".
DO NOT use metal pots