Remote Control; Connecting A Playback Device; Hdmi Connection - OK. OPR 100 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remote control

3
Remote control buttons
22. VOLUME DOWN button
23. BACK button
24. MENU button
25. LEFT arrow button
26. OK button
27. PREVIOUS button
28. ON/OFF button
29. PLAY/PAUSE button
5. INSTALLATION
5.1
Picture size and projection distance
The following picture sizes can be achieved with the following projection distances (distance between the projector and
the wall):
91.7 inch: 64 inch (2.33 m: 163 cm)
96.9 inch: 70 inch (2.46 m: 178 cm)
108.7 inch: 80 inch (2.76 m: 203 cm)
123.2 inch: 90 inch (3.13 m: 229 cm)
135.0 inch: 100 inch (3.43 m: 254 cm)
161.8 inch: 120 inch (4.11 m: 305 cm)
5.2
Positioning and adjustment
Place the projector on a solid, horizontal surface.
Direct the projector onto a white wall using the lens. Bear in mind the distance required to the wall in relation to the
picture size that you wish to achieve, see the previous paragraph.
Connect the plug on the mains cable to the power input (1) on the projector.
Connect the mains plug to a wall socket.
Remove the lens cap (20).
Switch the projector on with the ON/OFF button (5). The projector will warm up and project the menu onto the wall.
Turn the adjusting screw (21) on the base of the projector to increase or decrease the tilt angle.
Use the focus ring (3) to adjust the sharpness of the picture.
Use the keystone correction ring (2) to correct the picture if it takes on a vertical trapezium shape.
5.3

Connecting a playback device

HDMI connection

Use an HDMI cable to connect the HDMI output of a device (e.g. a computer, DVD player or media player) to the
HDMI input on the projector (14).
VGA connection
Use a VGA cable to connect the VGA output of a computer or laptop to the VGA input on the projector (13).
AV video connection
Use the supplied AV video cable to connect the AV video output of a video device to the AV video input on the
projector (18).
5.4
Connecting headphones or speakers
Use an audio cable with a 3.5 mm jack to connect headphones or speakers to the audio output (19) of the projector.
03
30. MUTE button
31. NEXT button
32. UP arrow button
33. RIGHT arrow button
34. DOWN arrow button
35. INPUT button
36. VOLUME UP button

Publicité

Table des Matières
loading

Table des Matières