NAMES AND FUNCTIONS OF THE PARTS
Remote control
6
En
1
Infrared signal transmitter
Sends infrared signals.
A (Power)
2
Turns this unit on, or sets it to standby mode.
3
PURE DIRECT
Reproduces any input source in the purest sound possible (
4
Input selector buttons
Selects the input source (LINE or USB) you want to listen to.
5
VOL +/–
Adjusts the volume.
6
MUTE
Reduces the current volume level by approximately 20 dB. Press again to restore the
audio output to the previous volume level. Pressing the VOL +/– also cancels muting.
The INPUT indicator on the front panel for the current input source blinks while the
output is muted.
+
page 13).