General Information; Technical Data - LK Armatur 298470 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB
ENGLISH

General Information

The LK 440 EasyHeat is a complete portable electrically-heated
boiler. It is primarily meant to be used as a temporary heater,
e.g. for drying concrete slabs installed with under floor heating
and for heating buildings under construction installed with a
under floor heating system.
The boiler has a total output capacity of 9 kW and it works in
two steps of 4.5 kW.
The boiler is supplied complete with a circulation pump, an
expansion tank, and auxiliary devices including a safety valve
and air-bleed valve.
Connection
to
the
heating system is simple, using steel-reinforced flexible hoses.
LK 440 EasyHeat is factory wired and complete with a 3-phase
400 V electric plug. Temperature regulation is controlled by the
boiler's operating thermostat.
4
6
15
5
8
10
11
under
floor
heating
1
3
7
14
13
12

Technical data

Art. No.
Output
Voltage
Electrical cartridge
Pump
manifold/
Protection class
Operating thermostat
Safety thermostat
Expansion tank
Safety valve
Max. glycol solution
Boiler volume
PS max. pressure for
boiler jacket
Dimensions (L x W x H) 710 x 430 x 650 mm
Weight
2
LK 440 Easy Heat comprises of:
9
1. Electrically-heated boiler, 9 kW
2. Control box
3. Expansion tank, 12 litres
4. Safety valve, 1.5 bar
5. Pressure gauge
6. Automatic air-bleed valve
7. Circulation pump, Grundfos UPM3 AUTO L 15/70
8. Steel-reinforced connection hose 1", length 1 m
9. Cable with 3-phase coupling connector, length 1 m
10. Operating thermostat, 0-60 ºC
11. Multipolar main switch
12. Trip switch, overheating protection
13. Trip switch (automatic fuse (10 A)), circulation pump
14. Power amplification indication
15. Filling valve
298470
9 kW in two stages at 4.5 kW
3-phase 400V, connection via
3-phase electric plug
Boiler must be protected
using 3 x 16 A fuses (max.
current 13.5 A)
9 kW/6-tube 400 V, stainless
steel SS2353, connection 2"
Grundfos UPM3 Auto L 15/70
1 phase 230 V (factory fitted
to control box)
IP 21
Max 60 ºC
70 ºC
12 litres
1,5 bar
30%
2,8 litres
1,5 bar
30 kg

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

440 easyheat

Table des Matières