Inserting The Battery - BH Tecnovita YR10 FACIAL TENS Mode D'emploi Et Garantie

Operation

Inserting the battery:

To load the battery open the battery
cover at the back of the device. Insert
a CR-2032 battery and cover it back.
1.Connect the cable to the unit.
2.Connect the pad cord plug into the device.
3.Place the pads on specific area on the face
making sure it is securely attached.
On/Off button- Confirm- Pause & start.
Select button.
Time & intensity button.
22
English
3
2
1
Application area.
Low battery indicador.
Connection indicador.
Operation status.
Intensity
Timer.
START UP
1. Press POWER to turn on the device.
2. Press SELECT to choose desired area (forehead, eyes & cheek),
and press POWER to confirm.( Fig.1/ i.e.: forehead) .
3. An icon "Y" (fig2.) indicates. If program selection is confirmed,
press POWER to settle the selection. (or press SELECT to rest)
4. Press UP or DOWN to set stimulation time from 3 to 10
minutes with 1 minutes interval. (fig.3)
Fig.1
Fig.1
Fig.2
Fig.2
Fig.3
Fig.3
23