Battery Replacement - HQ TORCH-L-CAMP03 Mode D'emploi

Overview
1. 0.5W LED Light
2. Power Conducted panel
3. 0.5W LED Light
4. LED Side Light
5. Power Switch
Specifications:
Material: Aluminum
Dimensions: 104x37x27mm
Lighting: LED
Battery: 1x LR6 "AA"
Resistance: IPx6
Burn time: 0.5 W LED - 6 hours
Side LEDs - 10 hours

Battery Replacement

1. Twist the backside of the torch to the "OPEN"
position to open the lid.
2. Insert 1 AA size battery with the "+" downside in
the battery holder of the torch.
3. Put the lid back on the torch and twist it to the
"LOCK" position to close it.
4. After you have replaced the battery, do not touch
the "power conducting panel" for 10 seconds.
5. The torch is ready to use.
Power Operation
1. Press the "Power" button to activate the torch.
2. Touch the "power conducting panel" to activate the 0.5 W LED light.
3. If you are not touching the "power conducting panel" the side LEDs of the torch will burn
(you can hang or place the torch somewhere to let it function as a lantern).
4. To deactivate the torch press the "Power" button again.
Press
Precuations
• Avoid to light directly toward people's eyes.
• W ith every battery replacement, please follow chapter "Battery Replacement" in this manual.
ENGLISH
Open
Tighten
2
Standing 5-10 seconds
Press