Petsafe Innotek LP-4100 Manuel D'utilisation page 7

WARNING
Step 1: Turn the power OFF to the outlet that the Surge Protector and Fence
Transmitter will be plugged into.
Step 2: Tape the top of the cover plate to the wall, then remove the cover plate center
screw. Plug the Surge Protector into the lower outlet and then secure the cover plate
using the longer screw included in the protector. Remove the tape and turn ON the
power to the outlet.
Note: The screw is for mechanical attachment only and does not ground the protector.
Remove any other protectors and ground connections that may be attached to the
transmitter. The LP-4100 Surge Protector gets its ground connection from the AC
outlet. Any additional ground connections will interfere with the protective action and
may also interfere with the operation of the fence transmitter.
Risk of electric shock.
Turn off power to the outlet before installing or removing the
Surge Protector.
www.petsafe.net 7