Publicité
Les langues disponibles
Les langues disponibles
4 in 1 Universal Remote Control EKCORC4n1E
General Security Note
Technical manipulations of the product or any changes to the product
are forbidden, because of security and approval issues.
Please take care to set up the device correctly - consult your user
guide. Children should use the device only under adult supervision.
Avoid the following :
· strong mechanical wear and tear
· high temperature
· strong vibrations
· high humidity
Please also respect the additional security notes in the various user
guide chapters. For questions not covered from the user guide please
contact our technical hotline or another specialist.
To ensure correct set up please read the manual and security notes
carefully.
Battery change :
The device may only be used with 2 AAA Alkaline batteries - never
try to connect to another power supply. When inserting batteries be
sure the right polarity is used. Remove the batteries when the device is
not used for a longer period. Make sure that the batteries are not short
circuited and are not disposed in fire (danger of explosion)
Batteries do not belong in children hands. Don't let batteries lay
around openly - they might be swallowed by children or animals. If
this happens see a doctor immediately.
Leaking or damaged batteries can upon contact with skin cause bur-
ning or acid damage - if necessary use suitable gloves
Please dispose of batteries in accordance with local bylaws
4 in 1Universal Remote Control EKCORC4n1E
Contents
1) Introduction
2) Put in the batteries
3) Functions of the key
4) Programming of the TV, VCR, DVD and SAT mode
5) Manual code search
6) Automatic code search
7) Brand search
8) Identifying codes found
9) Default Volume Control for satellite
10) Troubleshooting
1) Introduction
The 4 in 1 Universal Remote Control is designed to control up to 4
devices (TV, VCR, DVD, SAT). The 4 in 1 Universal Remote Control
contains a library of codes that are pre-programmed into the remote
control. This library covers nearly all the audio video products on the
market today.
2) Put in the batteries (always use NEW AAA alkaline batteries)
1. Open the cover on the back of the 4 in 1 Universal Remote Control.
2. Insert 2 AAA alkaline batteries, verify that they are placed correctly
with the + on the battery in the same position as marked inside the
battery compartment.
3) Functions of the keys
[1] L ED indicator: The indicator light flashes when the remote is ope-
rating or lights continuously while you are programming the remote.
[2] POWER: Allows you to switch off the last selected appliance.
[3] T V, VCR, DVD, SAT: These keys allow you to select the appliance
you wish to control.
[4] S ETUP: Allows you to program your remote before the first use.
[5] SHIFT: Allows you to access secondary functions such as Menu,
Exit, etc... Press and release the Shift key, the LED will stay on indi-
cating the Shift mode, press then the function keys you want. Pressing
and releasing the Shift key will toggle the remote back to normal
operation. If no key is pressed after the Shift key the remote will time-
out to normal (non-shifted) operation after 15-20 seconds.
[6] INFO: Displays information of the selected appliance.
[7] P ROG +/-:
TV, VCR or SAT mode: select the next or the previous channel.
DVD mode: select the next or previous chapter.
SHIFT + PROG +/-: menu navigation keys, allow you to navigate
up and down into the menu of your appliances.
[8] Volume +/-: Allows you to control the volume. You can control the
volume of your TV even when you are in VCR, DVD or SAT mode.
GB
Publicité
