Installing On A Wall - Schwaiger DTA4000 011 Mode D'emploi Et Consignes De Sécurité

USER GUIDE
INSTALLING THE OUTDOOR AERIAL
A. Installing on a mast
Push the U-clamp through the mast, adjust the aerial bracket and tighten the screws.
Tie about 1 metre of the coaxial cable to the fixing post at a height of about 0.5 metres, so that the aerial has enough
play to allow for altering its position.
0,5m
1m
B. Installing on a wall
Bore holes in the wall to correspond with the positions of the holes in the aerial clamp, insert plastic plugs in the holes,
fix the clamp to the wall and fasten it with screws.
9