Manufacturer's Information - Schwaiger DTA4000 011 Mode D'emploi Et Consignes De Sécurité

1. Make sure that the DAB+ radio is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial connection port on the
Power inserter.
3. Now plug the cable of the external power supply unit into the 12 V DC 100
mA socket of the power inserter and the external power supply unit into a
230 V AC socket.
4. Plug the IEC connector provided (radio IEC connector) onto the short coaxial
cable of the power inserter and then connect that to the aerial input of your
DAB+ receiver.
5. You can now look for channels that you can receive.
If necessary, refer to the DAB+ radio user manual for guidance.
Disposal
Do not dispose of batteries or electric and electronic devices in the normal household waste. The consumer is le-
gally obliged to return electrical and electronic devices and batteries that are at the end of their useful life to the
point of sale or public collection points that have been set up for this purpose. Legislation in the country of use
governs individual details regarding disposal. The symbol on the product, the user guide or the packaging indicates
this legal requirement.
Disclaimer
Schwaiger GmbH does not accept any liability or warranty for damages that are sustained due to improper installation or
mounting, improper use of the product or non-compliance with the safety instructions.

Manufacturer's information

Dear Customer, Please contact our Technical Support if you need technical advice and your retailer is unable to help you.
Simplified declaration of conformity as per the RED Directive
Schwaiger GmbH hereby declares that the radio system type complies with Directive 2014/53/EU.
The complete EU declaration of conformity is available online at: http://konform.schwaiger.de
Office hours:
Monday to Friday: 8:00 a.m. - 5:00 p.m.
Schwaiger GmbH
Würzburger Straße 17 | 90579 Langenzenn
Direct line: +49 (0) 9101 702-299
www.schwaiger.de | info@schwaiger.de
13
USER GUIDE