Facom V.770F Notice Originale page 6

GETTING STARTED WITH THE MACHINE
Always use of an air line lubricator with these tools. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm3 through the machine's inlet connection.
• BEFORE EACH OPERATION, CHECK:
- The condition of the safety devices
1
5
Model Impact
rate
V.770F 10 000
Model Air consumption
l/min
V.770F 32
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE
PRODUCT V.770F – FACOM AIR SABRE SAW
- IS IN CONFORMITY WITH THE «MACHINERY" DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-12: 2012
EN ISO 12100:2010
EN ISO 15744:2008
EN ISO 28927-8:2009
NU-V.770F_0815.indd 6
LUBRICATION
3
2
6
Pressure dB(A) Power dB(A)
k*
83,5 3 94,5
Working
pressure
bar
6,2
* k = measurement uncertainty in m/s²
CE DECLARATION OF CONFORMITY
EMERGENCY
GATE VALVE
4
7
Noise level
Pressure dB(C)
k*
3 85,7
Weigh Dimensions
kg mm
0,8 270 x 40 x 40
10 mm
1,6 mm MAXI
Vibrations level
m/s
2
k* k**
3 17,1 2,19
20.01.2010
FACOM QUALITY MANAGER
8/4/2015 11:59:08 AM