Technical Data; Technical Information - PROLUMIA LED PRO-FIT Manuel D'utilisation

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
CAUTION
1. The product must be installed by qualified technicians. The power supply must be cut before installation.
2. The installation wiring must be 2 x 1.0 mm² at least and wired in accordance with the latest IEE electrical regulations or the national requirements.
3. Do not touch the LEDs while installing or maintaining.
4. The LED light source of the lamp cannot be replaced. The complete product must be replaced if the light source is defect.

TECHNICAL DATA

Supply voltage: AC 220-240V 50/60Hz
Light source: SMD2835 LED
Operating temperature: -25°C - +50°C
Electrical safety class: Class II

TECHNICAL INFORMATION

Standard version
Input
Art. no. Color
power
40010304 White 6W
40010314 Black 6W
PHOTOCELL - DESCRIPTION
• Automatically turn on lights at dusk and off at dawn.
• Adjustable switching on/off ambient light level.
1
OFF
Daytime
PHOTOCELL - PARAMETER SETTINGS
Lumen
Photocell
switchable
700Lm / 350Lm Yes
700Lm / 350Lm Yes
2
ON
Dusk
www.prolumia.com
280
Semi shielded version
Input
Art. no. Color
power
40010324 White 6W
40010334 Black 6W
3
ON
Dusk - Night
By selecting the combination of the DIP
switches, switching on/off lux level can be
set as required.
When ambient light level drops below the
'on' lux level, sensor automatically switches
on lights. When ambient light level exceeds
the 'off' lux level, it switches off lights.
280
Lumen
Photocell
switchable
500Lm / 250Lm Yes
500Lm / 250Lm Yes
4
OFF
Dawn
5