4. Programming the individual dosing pumps
Every one of the four dosing pumps can be controlled separately.
Note: the dosing volume of 1,000 ml for each dosing unit should not be exceeded because this significantly reduces the
pump's service life. Having delivered the maximum volume of 1,000 ml a delay of at least 30 min should be maintained before
the next dosing unit.
· minimum flow rate of 1 ml can be set
· recommended max. flow rate 9,999 ml/day
· adjustable dosing time
· 1 – 24 dosing units/day can be set
· Interval days 0 – 30 can be set
· Output: approx. 60 ml/min
Press the Menu button to access the programming level.
Set
Date & Time
Set
Program <
The < symbol indicates which programming level you have currently selected. Use the or button to navigate between the
programming levels. Confirm Set Program by pressing the Menu button.
Select Pump-set:
1 2 3 4
You can now use the and buttons to select the pump to be programmed.
By pressing the Menu button again you confirm the selected pump and can use the or button to set the desired number of
dosing units per day (1 – 24).
P1 Time Per Day:
For: 01 (1 – 24)
P1 represents pump 1 to be programmed, P2 pump 2 etc.
By pressing the Menu button you set the interval days.
P1 Interval Day:
For: 00 (0 – 30)
The and buttons are used to enter the number of day intervals. With a day interval of 01, a dose will be dispensed ever day,
with 02 every two days etc. The setting 00 defines a daily dose as of today.
Then you can press the Menu button to set the dosing volume.
P1 Dosing Volume:
Num: 01 -- : 0010ml
Use the and buttons as well as the and buttons to set the desired dosing volume.
By pressing the Menu button you can use the and buttons as well as the and buttons to set the dosing times.
Dosing Time:
Num: 01 -- : 12:00
If several dosing units are desired, press the Menu button again and use the and buttons as well as the and buttons to
define more dosing volumes and dosing times.
P1 Dosing Volume:
Num: 02 -- : 0010ml
P1 Dosing Time:
Num: 02 -- : 13:00
7