B - The Options; Flushing System; Sand Filter; Self Priming Pump - Aqua-Base YC Série Manuel Utilisateur

1 – FLUSHING SYSTEM
Allows an easy flushing of the membranes, just by switching on the flush system. Assembling: look at the installation paper delivered with the
system.
See the On board installation YC with the flushing system in ANNEXES page 52.
2 – SAND FILTER
Fitted before the 5 micron filters, it allows prime filtration, reducing consumption of 5 micron filter cartridges. The sand filter is equipped with
only 1 valve (multi-position valve)manipulated for the cleaning, rinsing, filtration operations. Particularly interesting when the watermaker is
operating in dirty seawater (e.g. suspended sand).
See the On board installation YC with sand filter in ANNEXES page 52.
See the Electric diagram and spare parts of sand filter in ANNEXES page 56.
3 – SELF PRIMING PUMP
Fitted before the sand filter (or 5 micron filter), permit a correct feeding of the unit when the LP pump is not below the water line.
A check valve must be installed after the hull valve so that the feed system is always fills with water. (Not
supplies by SLCE).
See description oh the pump in ANNEXES page 57.
B – THE OPTIONS
J:\MANUEL-DOCUMENTATION\Projet manuels SLCE\1-SW PLAISANCE\AQUABASE Y\AQUABASE Y FRUKES 08-2007-C.doc
FR/UK/ES Page 24/24
VERSION 2007-08-C