Safety Functions - Enerwatt EWC612-200A Manuel De L'utilisateur

NO. DESCRIPTION
1 Terminal connection cable (-) with clamp (black)
2 Terminal connection cable (+) with clamp (red)
3
4 110 V power plug
5 Transport wheels
6
7
8
9 Full / LED green
10 Charge / LED orange
11 Error / LED red
40 A / LED red
12
max. charging current: 6V: 40 A/ 12V: 40 A
13 12V/10A/LED red (max. charging current:10A
14 12V/2A/ LED red (max. charging current:2A)
15 GEL / LED red
16 AGM / LED red
17 STD (Standard) / LED red
18 BOOST 6 V / LED red (max. starting current: 100 A)
19 BOOST 12 V / LED red (max. starting current: 200 A)
20 Charge 12 V / LED blue
21 Charge 6 V / LED blue
22
23
24
25
26
27
28
29
FUNCTIONS
The charger is equipped with a microprocessor (MCU - Micro Computer Unit) and features fully-automatic charging, diagnostic,
emergency and maintenance functions.
The "trickle charge" function allows the charger to be permanently connected. A full charge will be maintained.

Safety functions

The charger features the following safety features to prevent damage to the charger, the battery and the vehicle:
• Short circuit (defective battery)
• Incorrect connection (connected with reversed polarity)
• Sparking
• Overheating
• Excess current
• Overcharging
Housing
Inside Fan
Display
Handle
Display
START-STOP button to start or stop the selected charging function (indicated by LED)
SELECT RATE button for switching the charging current (indicated by LED)
SELECT TYPE button for switching the battery type (indicated by LED)
SELECT MODE button for switching the charging voltage (indicated by LED)
V / LED red
% / LED red
SELECT DISPLAY button for switching the display
To connect the charger to the battery (- terminal)
To connect the charger to the battery (+ terminal)
For connecting to a 110V mains socket
For cooling the charging electronics
Lights up once the connected battery is fully charged.
Lights up during the charging process
Lights up if the battery is connected incorrectly (reversed poles).
For charging high-capacity batteries
(e.g. marine or large deep-cycle batteries) or to quick-charge medium capacity batteries.
For charging medium capacity batteries (e.g. for lorries or tractors)
For charging medium capacity batteries (e.g. for lawn tractors, snowmobiles or motorcycles)
For absorbed glass mat batteries
For batteries with liquid electrolyte (WET) and maintenance-free lead-acid batteries (MF)
Helps start vehicles and equipment with weak batteries.
Helps start vehicles and equipment with weak batteries.
Shows the battery's charging current or the charge condition.
MODEL: EWC612-200A
FONCTION
Metal housing with louvres
For transporting the device
For operating the device
For pushing the device
For gel electrolyte batteries
For charging 12 V batteries
For charging 6 V batteries
Charging voltage
Battery charge condition
USER'S MANUAL
10