Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
c) Use of the appliance :
Operation/display
Commutator 7 positions :
Position 0
Position 6
Pilot light
Starting up
Select the commutator according to the power expected
-
The pilot light is on
-
Stopping the appliance :
Set the commutator on 0.
-
Remove the electric power supply cable
-
Let the appliance cool down.
-
Clean the appliance (cf. 6. Cleaning).
-
d) Failure / Repair :
In case of failure or if a part is damaged, please call your after sales service and have
qualified technician deal with any technical operations.
VI CLEANING AND MAINTENANCE
-
Remove the connector and let cool completely the device before any technical
intervention or any cleaning
-
Clean the appliance regularly each time you use it.
-
For cleaning, use only mild non-abrasive maintenance products for stainless steel,
soapy water or dishwashing liquid with a non-abrasive sponge.
-
Wipe the appliance with a damp cloth.
-
Dry the appliance with a soft clean cloth.
-
Never put the appliance
-
Never clean the appliance with a jet of water because leaks could cause
irreparable damage to it.
-
Never immerse the device, the cordon or plug in the water or quite other liquid
to avoid any electric shock.
-
Do not arrange the device above a source of steam.
Function
Off
Maximum
On
VII TECHNICAL CHARACTERISTICS
Model
ELR2
Power
2000 W
Outside Dimensions
350x400x155 mm
Voltage
230V 1Ph+N+T
Ampere
8 A
Weight
6 Kg
Wire Colours :
Phase
Neutral
Earth
VIII STANDARDS AND LEGAL MEASURES
The appliance complies with the standards indicated below :
-
IEC 60335-1
-
EN 60335-2-36
-
IEC 60335-2-36
-
EN 55014
-
EN 61000
ELR3
ELR4
3000 W
4000 W
600x400x155 mm
600x400x155mm
230V 1Ph+N+T
230V 3Ph+N+T
13 A
8 A / Ph
9Kg
10Kg
Brown or Black or Grey
Blue
Yellow-green
Publicité
Table des Matières
